Grandstream Networks BudgeTone-200 Bedienungsanleitung PDF herunterladen (Seite 22)

Grandstream Networks, Inc. BT200 User Manual Page 22 of 33

Firmware 1.1.5.15 Last Updated: 01/2008

Table 9: Device Configuration - Status

MAC Address

The device ID, in HEXADECIMAL format.

IP Address

This field shows IP address of BT200

Product Model

This field contains the product model information.

Software Version

• Program: This is the main software (firmware) release number, always used to

identify the software (firmware) system of the phone.

• Boot: Booting code version number

System Up Time

This field shows system up time since the last reboot.

Registered

Indicates whether accounts are registered to the related SIP server(s). BT200 can

support four unique SIP profiles.

PPPoE Link Up

Indicates whether the PPPoE connection is enabled (connected to a modem).

Table 10: Device Configuration – Basic Settings

End User

Password

This contains the password to access the Web Configuration Menu. This field is

case sensitive with a maximum length of 25 characters.

IP Address

There BT200 operates in two modes:

1. DHCP mode: all the field values for the Static IP mode are not used (even

though they are still saved in the Flash memory.) The BT200 acquires its IP

address from the first DHCP server it discovers on its LAN. The DHCP

option is reserved for NAT router mode. To use the PPPoE feature, set the

PPPoE account settings. The BT200 establishes a PPPoE session if any of

the PPPoE fields are set.

2. Static IP mode: configure all of the following fields: IP address, Subnet

Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2

(secondary). These fields are set to zero by default.

Time Zone

This parameter controls the date/time display according to the specified time zone.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Keine Kommentare

Grandstream Networks BudgeTone-200 Bedienungsanleitung Seite 22